Turning Brake Drums in 5 Steps

To ensure the safety of the vehicle, the foot brake plays a vital role. Hence, turning brake drums is quite extremely important to keep the working of one’s vehicles brake system intact. To ensure safety and toughness for the entire braking system, completing repairs, as soon as any fault appears, is mandatory. Otherwise, the vehicle […]

20170808335.jpg

To ensure the safety of the vehicle, the foot brake plays a vital role. Hence, turning brake drums is quite extremely important to keep the working of one’s vehicles brake system intact. To ensure safety and toughness for the entire braking system, completing repairs, as soon as any fault appears, is mandatory. Otherwise, the vehicle shall be risky to use, high will remain a reasoning of safety dilemma all the time. Below we have discussed the ways associated with turning brake drums.

 

# An individual: Materials and Tools

Turning brake drums will require the examples below tools:

  • Car grease and rags
  • Metal bar, long enough to arrive at at least 2 feet
  • Jack
  • Wheel chocks or even wooden blocks to prevent the car wheels within place
  • Screwdrivers and other tools
  • Axle stands

#2: Block the vehicle Wheels and Jack port the Vehicle

Place the hinders in front of the wheels blocking them from moving anywhere untoward. Using the car jack, elevate the rear side with the car. The axle appears will hold the car accurately. Lift the car a handful of inches above the floor to make sure you can pleasantly go underneath.

# Three: Remove the Brake Drum Include Plug

A cover or a connector connects the brake drum to the adjuster. Take the metal bar to be able to dismantle the stopper without any damage. Hand rotate the claims adjuster to remove the trapped brake drum.?

# 4: As appropriate, Remove the Holding Screws

The tyre hub is attached to the brake drum via the possessing screws. If it would seem hard to loosen the brake drum, grease and unscrew the items using the screwdriver. The brake pedal drum should come off easily afterward. Do the same exact for other brake drums as well.

#5: Grab the Drums to a Garage

To turn the brake drums professionally, it is necessary to take them to an auto mechanic shop. However, you can save the trouble if you own a lathe. A turning part is the most very important while machining drums. To ensure them function competently, scraping off smaller shavings is a must.

Consult a reputable mechanic to get further suggestions or assistance. Likewise take help, when reinstalling the foot brake drums afterward, if necessary.

 

Tips for buying used brake rotors

You may also like

0 comments